Eurocert
Food Safety and Agriculture

Food packaging and food-contact material compliance

Printed plastic food packaging on a production line beside a laboratory migration-test flask and a stack of compliance documents.

A shipment of yoghurt pots clears production, gets palletised, and then stalls at a retailer's goods-in. The buyer's quality team has asked one question the supplier cannot answer on paper: where is the Declaration of Compliance for the lidding film, and does it cover hot filling. The resin was food grade, the printer was reputable, the line ran clean. None of that mattered without the document that ties the material to its safe conditions of use. This is the daily reality of food-contact compliance, and it sits with every business in the chain, not only the packaging maker.

Food packaging is regulated as a product in its own right. A container, a film, a coating or a closure has to be safe for the food it touches, under the way that food is actually stored, filled and heated. For quality managers and export teams the work is less about a single certificate and more about holding a coherent evidence trail across materials, suppliers and markets. This guide maps that landscape: the EU framework that governs it, what migration testing really measures, and how the Declaration of Compliance carries the whole thing.

Why food-contact compliance is a chain, not a checkbox

The founding principle comes from Regulation (EC) No 1935/2004, the framework that sits above every material type. Materials and articles must be inert: they must not transfer their constituents into food in amounts that could harm health, change the composition of the food, or spoil its taste, smell or appearance. That sounds simple until you trace a single pack back through its supply chain.

A printed pouch might start as polymer granules from one producer, additives and masterbatch from another, film extrusion at a converter, then printing and lamination at a third site, before filling at the food business. Each actor knows only its own step well. Compliance works because every link issues a Declaration of Compliance to the next and keeps the test evidence to back it. The food producer who fills the pack inherits those declarations but still owns the safety of the finished article. Break one link in that documentation and the whole pack becomes unsellable to a serious buyer.

The EU framework, layer by layer

European rules for food-contact materials are built in layers, and knowing which layer applies to your product saves a great deal of wasted testing.

The umbrella and good manufacturing practice

Regulation 1935/2004 sets the general safety duty, traceability through the chain, and the labelling that tells users a material is intended for food, whether the wording "for food contact" or the glass-and-fork symbol. Alongside it, Regulation (EC) No 2023/2006 requires good manufacturing practice: a documented quality system so that materials are made consistently and to specification, with particular control over printing inks and the side of a material that faces the food.

Plastics: the most detailed rulebook

Regulation (EU) No 10/2011 governs plastics and is the most worked-out specific measure. It carries a Union List of authorised monomers and additives, and only listed substances may be used to make the plastic layer. It sets an overall migration limit of 10 milligrams of substances per square decimetre of food-contact surface, a measure of general inertness, and individual specific migration limits for substances that carry a toxicological restriction. For plastics a Declaration of Compliance is mandatory, and its contents are defined by the regulation itself.

Specific materials and the recycled question

Other materials have their own measures. Ceramics, glass and enamelled articles fall under Directive 84/500/EEC, which caps the release of lead and cadmium. Active and intelligent materials, regenerated cellulose film and a handful of substances such as BADGE each have dedicated rules. Recycled plastic is now governed by Regulation (EU) 2022/1616, which only accepts material made through an authorised recycling process. That last point matters more every year: packaging reform across the EU is pushing recycled content higher, while food-contact safety still limits which recycled streams qualify. The two pressures meet on the same pack.

The materials Europe has not harmonised

Here is the gap that catches exporters. Paper and board, adhesives, coatings, rubber, inks and many other materials have no specific EU regulation. Compliance still has to be demonstrated under the 1935/2004 duty, but the working benchmarks are national: Germany's BfR recommendations, Council of Europe resolutions, and for printing inks the Swiss Ordinance that many buyers treat as the de facto European reference. A business shipping into several markets often has to satisfy more than one of these at once, and a US line adds the FDA requirements under 21 CFR on top.

Food packaging and food-contact material compliance figure

What migration testing actually measures

Migration is the movement of substances from the material into the food. A laboratory cannot test against real foods for every case, so it uses food simulants chosen to mimic how aggressive a food is: dilute ethanol for most aqueous and alcoholic foods, dilute acetic acid for acidic products, vegetable oil for fatty foods, and a dry simulant for products like flour or biscuits. The article is exposed to the simulant at the time and temperature of its worst foreseeable use, including any hot fill, pasteurisation or microwave step.

Two questions are answered. Overall migration asks whether the material stays inert as a whole, against that 10 milligram limit. Specific migration asks whether any single restricted substance crosses its own threshold. A third effect often gets missed: set-off, where ink from the printed outer surface transfers onto the food-contact side when film is wound on a reel or pots are stacked. Behind all of this sits the modern headache of non-intentionally added substances, the breakdown products and impurities that are not on any list yet still have to be risk-assessed. Sound migration work is the heart of food packaging testing, and it is what a credible Declaration of Compliance rests on.

The Declaration of Compliance, done properly

The Declaration of Compliance is not a marketing line that says "complies with regulations". For plastics it has a defined content, and a good one for any material does the same job: it identifies the issuing business and the material, confirms which rules it meets, names the substances that carry restrictions so the next user can run their own checks, and, above all, states the conditions under which the article is safe. Those conditions are the point. A tray cleared for cold, dry food is not cleared for a fatty product heated in an oven. Use the article outside its declared conditions and the declaration no longer applies.

Behind the declaration sits supporting documentation: the migration test reports, the reasoning on non-intentionally added substances, the proof that any functional barrier works. That file is kept for enforcement authorities rather than handed to every customer, but it has to exist and to match what the declaration claims. The most common failure in an audit is a declaration copied from a template that no longer matches the product, the supplier or the real conditions of filling.

A Declaration of Compliance is a conditional statement, not a permanent badge. It is only as good as the conditions of use written into it and the test evidence filed behind it.

Where compliance breaks down in practice

Certain failures recur across audits and buyer rejections, and most trace back to treating compliance as a one-time purchase rather than a property of the finished pack.

  • Trusting "food-grade" resin. An approved raw material does not make a compliant article. Colours, additives, the conversion process and the conditions of use all change the result, and the obligation lands on the finished pack.
  • Ignoring inks and the set-off path. Printing is often outsourced and rarely covered by an EU-specific rule, yet it is a frequent source of contamination onto the food side.
  • Overlooking paper, board and adhesives. Because they are not harmonised, they tend to get less scrutiny, not more, which is exactly backwards.
  • Skipping the assessment of non-intentionally added substances. Auditors increasingly ask to see it, and its absence undermines the whole declaration.
  • Importers relying on unverified paperwork. A declaration from an overseas supplier still has to stand up under EU rules, and the importer carries that responsibility at the border.

Turning documents into verifiable assurance

A self-issued declaration is the legal minimum, but it is only as trusted as the company behind it. This is why many retailers and brand owners ask suppliers for independent testing and third-party conformity assessment rather than a declaration alone. A recognised mark such as an ISEGA certificate for food-contact materials gives a buyer assurance that an outside laboratory has checked the claims, and structured food-contact and contamination certification ties testing, documentation and ongoing control into one defensible package. For the paper and board side, a scheme such as GMP certification for corrugated board brings the same discipline to fibre-based packaging that the plastics regulation brings to film.

None of this needs to be heavier than the product warrants. A simple cold-water bottle and an oven-ready dual-compartment tray sit at very different ends of the risk scale, and the evidence should match. The aim is a documentation trail that a quality manager, an importer and an enforcement officer would each read the same way: the right rule for the material, migration data from realistic conditions, and a declaration that tells the truth about how the pack is meant to be used.