The aerospace supply chain: an AS 9100 certification roadmap

A precision machine shop spends a year proving it can hold tight tolerances, wins the attention of a Tier 1 aerostructures supplier, and sits down to talk parts. The first question is not about price or lead time. It is, "What is your AS 9100 certificate number, and can we see it in OASIS?" No certificate, no request for quotation. That moment repeats across the aviation, space and defense sector every week, and it explains why AS 9100 is less a quality badge than the access card to the entire aerospace supply chain.
If you build, machine, treat, assemble or distribute parts that end up on an aircraft, an engine, a satellite or a defense platform, this is the standard your customers will measure you against. What follows is the roadmap to getting there: why the primes insist on it, what it asks of you beyond ISO 9001, and the realistic sequence to certification.
Why the primes insist on AS 9100
Aerospace parts are unforgiving. A single nonconforming fastener, an undocumented material substitution or a missed heat-treat step can put lives at risk and ground a fleet. Because the consequences are severe and the supply chain is deeply tiered, the original equipment manufacturers push their quality requirements down through every level of that chain. Boeing, Airbus, Rolls-Royce, Safran, GE Aerospace and Collins, along with Turkish primes such as Turkish Aerospace (TUSAS), TEI, Roketsan, Aselsan and Baykar, expect their suppliers to hold a 9100-series certificate before they appear on an approved supplier list.
This is the flow-down principle. A prime requires AS 9100 of its Tier 1 partners, who require it of their Tier 2 machine shops and special processors, who in turn require evidence from the small forges and platers below them. A four-person anodizing line can be pulled into the same expectations as a major structures house, simply because of where it sits in the chain. The certificate is not a trophy on the wall. It is the precondition for being quoted at all.
The verification mechanism matters as much as the certificate. Every valid 9100 certification is registered in OASIS, the Online Aerospace Supplier Information System maintained by the International Aerospace Quality Group. A buyer can look you up, confirm your scope and check that your certificate is live and issued by an accredited body. A certificate that is not in OASIS, or one from a body outside the recognized scheme, carries little weight with a serious customer. In practice, the OASIS entry is the thing the procurement team trusts.
Start from your ISO 9001 base
AS 9100 contains the whole of ISO 9001 and wraps aerospace-specific requirements around it, so a mature quality system already carries most of the load. The gap that remains clusters in a handful of areas, configuration management, first article inspection, counterfeit and foreign-object controls, product safety, operational risk management and validated special processes, and the AS 9100 certification page lays out the full picture clause by clause. For a roadmap the catalogue matters less than the order, because each of these areas depends on decisions and records created before it. Build them out of sequence and you repeat work; build them in the right order and each piece feeds the one after it. That order is what the rest of this guide walks through.
The path in: a realistic sequence
Certification is a project with a natural order. Rushing the middle to reach the audit date is the most common way to fail it. The sequence below is the one that holds up.

1. Fix your scope and pick the right standard
The 9100 series has three members: AS 9100 for organizations that design and manufacture product, AS 9110 for maintenance, repair and overhaul, and AS 9120 for distributors and stockists. Your scope statement should match what your customers actually buy from you, because it is the scope that appears in OASIS and on the certificate.
2. Run a gap analysis against the aerospace deltas
Measure your current system against AS 9100, paying attention to the additions above rather than the ISO 9001 core you likely already meet. The output is an honest list of missing processes: configuration management, first article inspection, counterfeit and foreign-object controls, product safety planning, and tighter traceability. A focused gap analysis is also where you discover which special processes will need external accreditation.
3. Build the aerospace-specific processes
Close the gaps with processes your people will actually use, not a binder that sits on a shelf. Set up your special-process controls and Nadcap arrangements where customers demand them, define how you pass requirements down to your own sub-tier suppliers, and put your on-time and quality metrics in place so they have history by audit time.
4. Operate the system and gather evidence
Aerospace certification rewards a track record. You need real records before the audit: completed first article inspections, a full internal audit cycle, a management review, performance data over several months, and at least one closed corrective action that shows root-cause analysis with human factors considered. Three weeks of records will not convince an aerospace auditor.
5. Choose an accredited certification body
Select a body whose auditors are aerospace-qualified and that can register your AS 9100 certification in OASIS under the recognized scheme. This is not a place to shop on price alone. A certificate from an unrecognized body will not satisfy a prime and may have to be redone.
6. Stage 1, Stage 2 and closing findings
Stage 1 reviews your documentation and readiness. Stage 2 is the on-site effectiveness audit. Expect findings, and treat each one as a chance to show disciplined corrective action rather than a quick patch. Once findings are cleared, the body makes its decision and registers the certificate in OASIS.
7. Maintain it
Certification runs on a three-year cycle with annual surveillance audits and recertification at the end. Your delivery and quality performance keep being watched throughout, so the system has to live in daily operations rather than wake up before each audit.
Where first-time aerospace suppliers stumble
The patterns repeat. Configuration management and first article inspection are routinely underestimated by firms coming from a general manufacturing background. Counterfeit-part and foreign-object controls get written as policies but not embedded as habits. Sub-tier supplier control is thin, even though your certificate makes you accountable for what your suppliers send you. And performance data is often missing, when on-time delivery and quality numbers are exactly what your customers will judge you on after certification.
None of this is a reason to wait. Demand for qualified aerospace suppliers is strong, and a credible certificate opens doors that stay shut to everyone without one. The move from general manufacturer to approved aerospace supplier is a defined journey rather than a leap: start with an honest gap analysis, give the build the months it genuinely needs, and treat AS 9100 certification as the beginning of a customer relationship, not the end of a paperwork exercise.
Picked for You
Related Articles

E-Marking and IATF 16949 for Automotive Suppliers
Read More →
Entering the US market: UL, FCC and NRTL certification
Read More →
